|
Polypropylene Multi Layers Cleanup Cartridges
- Optimal SPE Cartridges are provided for combination with Dioxins Cleanup System (DAC695/DPU-8).
- Dirty samples can be cleaned up with cartridges combined with an adaptor.
- The automation of the cleanup and the operation time can be shortened.
- Packing amount of cleanup materials shown in JIS K-0311-1999, K-0312-1999 is packed into the 2 or 4 layer cartridges.


PP Cleanup Cartridges |
 |
Glass Multi Layer Cartridges
- Glass Cleanup Cartridge Columns of conditioned multi-layer silica gel are showin in JIS K-0311-199, K-0312-1999.
- These cartridge columns are used for Dioxins Cleanup System, DAC695/DPU-8 through a sole use adaptor.

Glass Multi Layer Cartridge |
 |
Conditioned Silica Gel for Dioxins Cleanup

Silica Gel (conditioned) |
 |
Carbon Silica Gel, Carbon Silica Gel Cartridges
- The carbon silicagel is a structure of extracting activated carbon on the surface of spherical silica gel.
- It is possible to adjust the carbon silica gel of different absorption powers with control of the active carbon volume on the surface.
- Three types of carbon volume are provided.
- 2 Layer Cartridge columns are packed with carbon silica gels of 2 different adsorption features.
- It improves difficult points under cleanup method with traditional single carbon silica gel column.
- Data reliability and work saving of Dioxins cleanup are improved if the carbon silica gel cartridge used
with DAC695 since the flow volume control and fraction switching are performed automatically.
- Cleanup material with less impurity by the special procedure.
- A high recovery ratio is obtained even with few solvents.
- Impurities is does not come out from the material by adopting glass reserver.
- It is possible to perform fractions of di-ortho PCB, mono-ortho PCB, non-ortho PCB and PCDD/DFs clearly.
 |
 |
| Single Layer Carbon Silica Gel Cartridge |
2 Layer Carbon Silica Gel Cartridge |

2 Layer Carbon Silica Gel Cartridge Structure |

 |
Carbon Silica Gel(2 Layer 3s+8s type) and Fraction Example using DAC695 (Eluted as reverse of Fr3.)

Nitro Column, HPLC Column Nucleosil NO2
- Nitro Column can remove aromatic hydrocarbon.
- It is effective to clean up Dioxins when it is combined with Graphite Carbon Columns.

HPLC Column, Nucleosil NO2 |
 |
Cleanup materials for Dioxins Analysis, GL-Lite 3(equiv.to XAD-2)
- XAD-2 is a copolymer of stylene-divinyl benzene, and very often used for trapping organic compounds in water or atmosphere but
it was necessary to remove impurity before use.
- GL-Lite 3 is a latest model of Dioxins trapping materials which re-cleaned up and dried GL-Lite 2 based on EPA method (Method 0010Appendix).
| Max.Operation Temp.: |
250℃ |
| Packing Density: |
0.34~0.39g/mL |
| Fine Particle Volume: |
0.6~0.8mL/g |
| Average Particle Diameter: |
400~550μm |

GL-Lite 3 |
 |
Capillary columns for Dioxins, coplanar PCBs Analysis
- Some columns of non or high polar are used for Dioxins analysis.
- Different columns in polar are provided for the analytical method.
- At first, screening analysis is performed with the heat stable columns of non or medium polar methylsilicone.
- And columns in strong polar cyanopropylsilicone group are effective to separate 2,3,7,8-TCDD, TCDF or etc. 7-,8-Chloride compounds have a high boiling point.
- Non or middle polar methylsilicone columns are often used for the compounds analysis since the columns are heat usable and lined up.


Dioxins Fastness Analyses by InertCap 5MS/Sil
- Recently, Dioxins fastness analysis has been come up and columns of high resolution and stable are required.
- The fastness analyses are shown with one column/one injection by InertCap 5MS/Sil.



Send an inquiry
|