InertSep™ Phase Separator

InertSep™ Phase Separator

Phase Separation Membrane

Ⅰ.  InertSep PS-SH

InertSep Phase Separator is able to separate samples in two layers by liquid-liquid extraction. InertSep PS-SH is used for separating the solvent in the lower layer, such as dichloromethane.

 

Application

  • Separation of the water layer and the oraganic layer which is heavier than water.

 

Ⅱ.  InertSep PS-SL

InertSep Phase Separator is able to separate samples in two layers by liquid-liquid extraction. InertSep PS-SL is used for separating the solvent in the upper layer such as n-hexane.

 

Application

  • Separation of the water layer and the organic layer which is lighter than water.

 

Note : If the sample forms an emulsion, it may fail to make a separation.

 

Standard Cartridge

Item NameColumn SizeQuantityCat.No.
InertSep PS-SH1 mL100 pieces5010-67000
3 mL100 pieces5010-67001
6 mL100 pieces5010-67002
12 mL100 pieces5010-67003
InertSep PS-SL1 mL100 pieces5010-67010
3 mL100 pieces5010-67011
6 mL100 pieces5010-67012
12 mL100 pieces5010-67013

Standard Cartridge (High Volume Cartridge)

Item NameColumn SizeQuantityCat.No.
InertSep PS-SH20 mL100 pieces5010-67004
60 mL50 pieces5010-67005
InertSep PS-SL20 mL100 pieces5010-67014
60 mL50 pieces5010-67015

96-Well Plate

Item NameColumn SizeQuantityCat.No.
InertSep 96WP PS-SH-1 piece5010-67008
InertSep 96WP PS-SL-1 piece5010-67018