Products

InertSep Vacuum Manifold

InertSep Vacuum Manifold System

GL-SPE吸引マニホールドシステムの画像

For the efficient SPE analysis using InertSep vacuum manifold system, necessary accessories are provided as a kit for general or environmental analysis which needed many samples such as river water. Some kits are suitable for your analytical purposes.

InertSep Vacuum Manifold for general or environmental analysis

  • For General Analysis
    • InertSep vacuum manifold : 1 pc
    • Diaphragm Vacuum Pump : 1 pc
    • Suction Filtration Flask 1L : 1 pc
    • Vacuum tubing 2 m : 1 pc
    • Connector Tubing : 2 pcs
    • Stop valve : 12 pcs
    • Spitz Tube with co-plug and scale 12 mm : 12 pcs
    • Spitz Tube with co-plug and scale 16 mm : 12 pcs
  • For Environmental Analysis
    • InertSep Vacuum Manifold System : 1 pc
    • Diaphragm Vacuum Pump : 1 pc
    • Suction Filtration Flask 3 L : 1 pc
    • Vacuum tubing 2 m : 1 pc
    • Connector Tubing : 2 pcs
    • Stop Valve : 12 pcs
    • LS Tubing : 6 pcs
    • Spitz Tube with co-plug and scale 12 mm : 12 pcs
    • Spitz Tube with co-plug and scale 16 mm : 12 pcs

DescriptionQty.Cat.No.
Inertsep Vacuum Manifold System for General Analysis1/pk5010-50231
Inertsep Vacuum Manifold System for Environmental Analysis1/pk5010-50232

InertSep Vacuum Manifold

This standard vacuum manifold is recommended for starting solid-phase extraction. A 12 mm/16 mm Rack and waste liquid pump are provided as a set. InertSep Vacuum Manifold have an easy-to access structure to the next waste liquid funnel when performing solid phase extraction.

Set Contents
   
Glass Chamber: 1 pc
Vacuum Gauge: 1 pc
Plug : 12 pcs
Luer Fitting: 12 pcs
PTFE Delivery Tip: 12 pcs
12 mm Waste Liquid Funnel  : 12 pcs
Cover: 1 pc
Gasket : 1 pc
Bleed Valve  : 1 pc
Safety Valve: 1 pc
Cartridge Adaptor : 12 pcs
Stainless Delivery Tip : 12 pcs
12/16 mm Rack : 1 pc
16mm waste liquid funnel: 12 pcs
   

DescriptionQty.Cat.No.
Inertsep Vacuum Manifold Kit1/pk5010-50230

InertSep Vacuum Manifold for Eggplant-shaped Flasks

This is a set containing a rack for 50 mL eggplant-shaped flasks 4pc (100mL eggplant-shaped flasks 2 pcs).

Set Contents
Glass Chamber : 1 pc
Cover: 1 pc
Gasket: 1 pc
Vacuum Gauge: 1 pc
Safety Valve: 1 pc
Plug: 4 pcs
PTFE Female Luer: 4 pcs
Stainless Delivery Tip: 4 pcs
GL-SPE Vacuum Manifold TS29/38: 1 pc
Rack for Eggplant-shaped Flask (for 4 samples): 1 pc
Delivery Tip (PTFE): 4 pcs

DescriptionQty.Cat.No.
Inertsep Vacuum Manifold for Rounded Bottom Flask1/pk5010-50234

InertSep Vacuum Manifold for inorganic analysis

Nitric acid and sulfuric acid are used for inorganic compound analysis. This type of vacuum manifold system is made of stainless which have no concern of acid decay. This rack can set 50 mL DigiTUBEs up to 8 pcs.

Set Contents
Glass chamber : 1 pc
Cover (for 8 samples) : 1 pc
Gasket : 1 pc
Vacuum Gauge (SUS) : 1 pc
Bleed Valve (SUS) : 1 pc
Safety Valve (SUS) : 1 pc
Plug : 8 pcs
Luer Stop Valve (PTFE) : 8 pcs
PTFE Female Luer : 8 pcs
Delivery Tip (PTFE) : 8 pcs
DigiTUBE Rack : 1 pc

DescriptionQty.Cat.No.
Inertsep Vacuum Manifold for Non-Organic Analysis1/pk5010-50233

InertSep Vacuum Manifold 20

GL-SPE Manifold Kit 20 is a vacuum manifold system for treatment of 20 pcs SPE cartridges at the same time. Racks for 20 mL and 30 mL concentration tubes and a vacuum controller is standardly attached to this kit.

Set Contents
Glass Chamber : 1 pc
Gasket : 1 pc
Delivery Tip (SUS) : 20 pcs
Delivery Tip (PTFE) : 20 pcs
23mm Rack : 1 pc
Vacuum Controller : 1 pc

DescriptionQty.Cat.No.
Inertsep Vacuum Manifold with 20 Ports1/pk5010-50235

GL-SPE Manifold 20 for InertSep mini AERO DNPH

Flow controlled (approx. 1 mL/min) gravity floe elution speed enables to efficient elute of DNHP cartridges (up to 20 cartridges) after aldehyde capture. It is no need for pump to elute from cartridges, thus this system cut off manual troublesome elute procedure.

Set Contents
Glass Chamber : 1 pc
16 mm Test Tube Rack: 1 pc
PTFE Delivery Tip : 20 pcs

DescriptionQty.Cat.No.
Inertsep Vacuum Manifold with 20 Ports for Mini AERO DNPH1/pk5010-50236