Products

Other SPE Manifold

SPE Gravity Rack

SPE Gravity Rack

Ex.) Combination with GL-SPE Gravity rack

Ex) Combination with GL-SPE Gravity rack

Features

  • 12 Luer connection adaptors are installed on the upper plate, SPE cartridges can be attached as it is.
  • As upper plate can be adjust the fixed position up and down, various type of receiving containers (eggplant-shaped flasks, concentration tubes, test tubes, etc.).
  • 12 samples can be extracted at the same time. This attaches 70 mm polypropylene needles directly connected to luer connection adaptors, thus extraction can be performed in fast flow speed even when the samples are many (ex. Sample preparing for residual pesticide analysis) and performing liquid-liquid extraction.
  • When using 200 mL or 300 mL eggplant-shaped flasks, maximum 8 samples can be treated.
  • Stand for eggplant-shaped flasks (50/100 mL or 200/300 mL), concentration tubes (20/30 mL) and centrifuge tubes (50 mL) as receiving containers. For base unit, 2 pair of receiving rack can be installed.

DescriptionQty.Cat.No.
GL-SPE Gravity Flow Rack Basic Unit1/pk5010-50410

DescriptionQty.Cat.No.
GL-SPE Gravity Flow Rack Delivery Chip24pcs5010-50420
GL-SPE Gravity Flow Rack Delivery Chip100pcs5010-50421
Gravity Flow Rack Receiver Stand for Rounded Bottom Flask Flask 50/100mL1pc5010-50422
Gravity Flow Rack Receiver Stand for Rounded Bottom Flask Flask 200/300mL1pc5010-50423
Gravity Flow Rack Receiver Stand for Rounded Bottom Flask Flask 20/30mL1pc5010-50424
Gravity Flow Rack Receiver Stadn for Spin Down Tube 50mL1pc5010-50425
20mL Chemelute Cartridge Rack for 300mL Rounded Bottom Flask Flask Position Type1pc5010-50400

Note) GL-SPE gravity flow rack base unit contains no flow collection stand for receiving container. As the receiving stand for receiving container, stands are available for various size of receiving container like eggplant-shaped flasks and concentration tubes. Please select depending on your need.