Contact Us
Products

InertSep Series

InertSep C8

InertSep® C8

InertSep C8 is a silica-based sorbent modified with C8 (octyl) function groups that offers a weaker non-polar interaction than C18. InertSep C8 is used for isolates that are strongly retained too much on C18. With high-level end-capping, cationic interaction with the silanol groups on silica substrate is virtually eliminated and adsorption of basic compounds is reduced.

Average Particle Size ：60 μm
Carbon Load ：12 %
End-Capping ：Middle
Surface Area ：450 m2/g
Pore Volume ：0.7 mL/g
Pore Size ：6 nm
pH Range ：2 - 8

Syringe Barrel Type

DescriptionColumn DimensionSDSQty.Cat.No.
InertSep C850mg/1mLENG100pcs5010-61080
InertSep C8100mg/1mLENG100pcs5010-61081
InertSep C8200mg/3mLENG50pcs5010-61082
InertSep C8500mg/3mLENG50pcs5010-61083
InertSep C8500mg/6mLENG30pcs5010-61084
InertSep C81g/6mLENG30pcs5010-61085
InertSep C82g/12mLENG20pcs5010-61086
InertSep C85g/20mLENG20pcs5010-61087
InertSep C810g/60mLENG16pcs5010-61088
InertSep C820g/60mLENG16pcs5010-61089
InertSep C825g/150mLENG8pcs5010-61090
InertSep C850g/150mLENG8pcs5010-61091
InertSep C870g/150mLENG8pcs5010-61092

Large Size LSC Type

DescriptionColumn DimensionSDSQty.Cat.No.Remark
InertSep LSC C8100mgENG50pcs5010-63081On Request
InertSep LSC C8200mgENG50pcs5010-63082On Request
InertSep LSC C8500mgENG50pcs5010-63083On Request

Lure Device Type

DescriptionColumn DimensionSDSQty.Cat.No.
InertSep Slim-J C8500mgENG50pcs5010-65080
InertSep Slim-J C81000mgENG50pcs5010-65081

96 Well Plate

DescriptionColumn DimensionSDSQty.Cat.No.
InertSep 96WP C850mgENG1pc5010-66050
InertSep 96WP C8100mgENG1pc5010-66051

SPE Sorbent

DescriptionParticle SizeVolumeSDSQty.Cat.No.
InertSep C860µm100gENG1pc5010-69003