InertSep Series

InertSep C2

InertSep® C2

InertSep C2 is a silica-based sorbent modified with C2 (ethyl) functional groups being utilized for a weaker non-polar interaction than C8. InertSep C2 is used for isolates that are strongly retained too much on C8. As end-capping is accomplished on this sorbent, cation exchange interaction with none bonded silanol groups is virtually eliminated resulting in reduced adsorption of basic compounds.

Average Particle Size : 60 μm
Carbon Load : 5.5 %
End-Capping : Middle
Surface Area : 450 m2/g
Pore Volume : 0.7 mL/g
Pore Size : 6 nm
pH Range : 2 - 8

Syringe Barrel Type

DescriptionColumn DimensionSDSQty.Cat.No.
InertSep C250mg/1mLENG100pcs5010-61120
InertSep C2100mg/1mLENG100pcs5010-61121
InertSep C2200mg/3mLENG50pcs5010-61122
InertSep C2500mg/3mLENG50pcs5010-61123
InertSep C2500mg/6mLENG30pcs5010-61124
InertSep C21g/6mLENG30pcs5010-61125
InertSep C22g/12mLENG20pcs5010-61126
InertSep C25g/20mLENG20pcs5010-61127
InertSep C210g/60mLENG16pcs5010-61128
InertSep C220g/60mLENG16pcs5010-61129
InertSep C225g/150mLENG8pcs5010-61130
InertSep C250g/150mLENG8pcs5010-61131
InertSep C270g/150mLENG8pcs5010-61132

Large Size LSC Type

DescriptionColumn DimensionSDSQty.Cat.No.Remark
InertSep LSC C2100mgENG50pcs5010-63121On Request
InertSep LSC C2200mgENG50pcs5010-63122On Request
InertSep LSC C2500mgENG50pcs5010-63123On Request

Lure Device Type

DescriptionColumn DimensionSDSQty.Cat.No.
InertSep Slim-J C2500mgENG50pcs5010-65120
InertSep Slim-J C21000mgENG50pcs5010-65121

96 Well Plate

DescriptionColumn DimensionSDSQty.Cat.No.
InertSep 96WP C250mgENG1pc5010-66070
InertSep 96WP C2100mgENG1pc5010-66071

SPE Sorbent

DescriptionParticle SizeVolumeSDSQty.Cat.No.
InertSep C260µm100gENG1pc5010-69005